{"product_id":"3-inch-lift-kit-chevy-silverados-or-gmc-sierra-2500hd3500hd-20-26-2-inch-block-kit-with-overload-fox-25-performance-series-hto","title":"3 Inch Lift Kit | Chevy Silverados or GMC Sierra 2500HD\/3500HD (20-26) - 2 Inch Block Kit With Overload \/ FOX 2.5 Performance Series HTO","description":"\u003cp\u003eLevel out your 2020-2026 Chevy Silverado and GMC Sierra 2500 HD 4WD truck and improve the ride with this 3-inch leveling lift kit featuring FOX 2.0 IFP Performance Series shocks from BDS Suspension. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 35\" tires.\n\u003c\/p\u003e\u003cp\u003e\nUp front the lift kit includes FOX 2.0 Performance Series IFP shocks and heavy duty tubular upper control arms for increased strength. Along with the control arms, a pair of indexed cast steel torsion bar keys are supplied upfront to lift the vehicle and a small differential relocation kit is supplied to correct CV axle operating angles without affecting ground clearance. To eliminate sway bar interference, a pair of sway bar relocation brackets is used which maintains proper operating angle.\n\u003c\/p\u003e\u003cp\u003e\nIn the rear, a 2\" block and u-bolt kit is used to create a level to slightly tail high stance when unloaded. Rounding out these kits are a pair of specially tuned FOX 2.0 performance series IFP shocks ready to soak up the terrain.\u003c\/p\u003e\n\u003ch2\u003eThis Kit Configuration\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear Lift Option:\u003c\/strong\u003e 2 Inch Block Kit With Overload\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBDS Part Number:\u003c\/strong\u003e BDS761FPS\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFOX 2.5 PS IFP Performance Series shocks offer improved performance and damper capacity.\u003c\/li\u003e\n\u003cli\u003e Performance UCAs increase strength and allow for more suspension travel \u003c\/li\u003e\n\u003cli\u003eHigh strength cast torsion bar keys use an indexed design to provide additional ride height. \u003c\/li\u003e\n\u003cli\u003eSway bar relocation for proper clearance \u003c\/li\u003e\n\u003cli\u003eDifferential relocation to improve CV operating angle.\u003c\/li\u003e\n\u003cli\u003e Rear block and u-bolt kit provides lift while maintaining spring function and load capacity\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTire \u0026amp; Wheel Fitment\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e35 x 12.5 tire on a 17 x 9 wheel with 5.75\" backspacing\u003c\/li\u003e\n\u003cli\u003e35 x 12.5 tire on a 18 x 9 wheel with 5.75\" backspacing\u003c\/li\u003e\n\u003cli\u003e35 x 12.5 tire on a 20 x 9 wheel with 5.75\" backspacing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEstimated install time:\u003c\/strong\u003e 3-4 hrs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDifficulty:\u003c\/strong\u003e Moderate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecial tools:\u003c\/strong\u003e Grinder\/Sanding Disc, Torsion Bar Unloading Tool\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eImportant Notes\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eDisassembly\/assembly of the factory torsion bar system requires the use of a special unloading tool. The GM specified tool #CH48809 \u003c\/li\u003e\n\u003cli\u003eSome minor trimming may be necessary to fit certain wheel\/tire combination. This is normal with most aftermarket tire\/wheel fitment on Chevy\/GM trucks and typically consists of trimming the bottom edge of the inner fender shrouds and\/or lower corner of front bumper valance. As a rule of thumb, deeper backspacing and shorter\/ narrower tires will reduce\/eliminate trimming required. Further trimming tips are included at the end of this instruction sheet.\u003c\/li\u003e\n\u003cli\u003e Stock wheels and stock tires can be installed, but depending upon alignment and tire profile will be tight to the ball joint cup. Wheel spacers may be required to use stock wheels and stock tires.\u003c\/li\u003e\n\u003cli\u003e Will NOT work with AT4X or ZR2 models, lower control arm profile is different \u003c\/li\u003e\n\u003cli\u003eDually models must select the \"2 Inch Block Kit With Overload\" option.\n\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"BDS Suspension","offers":[{"title":"Default Title","offer_id":42717584162901,"sku":"BDS761FPS","price":2417.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/5868\/8853\/files\/bds_gm_760FS_761FS_c6a349d0-bf76-4766-a559-29e847bda076.jpg?v=1783717298","url":"https:\/\/padoverland.com\/products\/3-inch-lift-kit-chevy-silverados-or-gmc-sierra-2500hd3500hd-20-26-2-inch-block-kit-with-overload-fox-25-performance-series-hto","provider":"PAD Overland","version":"1.0","type":"link"}