{"product_id":"35-inch-lift-kit-ford-ranger-19-23-4wd-nx2-nitro-series-cast-aluminum","title":"3.5 Inch Lift Kit | Ford Ranger (19-23) 4WD - NX2 Nitro Series \/ Cast Aluminum","description":"\u003cp\u003eImprove the performance and style of your 2019-2023 Ford Ranger truck by installing this 3.5-inch lift kit from BDS. Specially designed for the new Ranger, this 3.5\" leveling kit is engineered for additional tire clearance and improved performance without overextending the suspension or driveline angles at full suspension droop.\u003c\/p\u003e\n\u003cp\u003eTo prevent maxing out ball joints or CV damage, BDS gets around this issue by using a 2-piece design with a smaller top mounted steel strut spacer in combination with a preload spacer. To further ensure proper drivetrain geometry the front differential is repositioned using relocation brackets. These brackets correct CV axle angle while allowing the use of the factory front skid plates. Also supplied for the front end are a pair of performance upper control arms (UCAs) designed for improved strength and suspension travel. \u003c\/p\u003e\n\u003cp\u003eUp front, the lift kit includes steel top mount strut spacers, pre-load spacers, differential relocation brackets and tubular upper control arms. In the rear, this kit includes heavy duty lift shackles and custom-tuned NX2 Nitro or FOX Performance series shocks. \u003c\/p\u003e\n\u003ch2\u003eHD Upper Control Arms (UCAs)\u003c\/h2\u003e\n\u003cp\u003eBuilt for strength, performance and increased travel, these upper control arms are ready to bolt-in with most leveled\/lifted trucks. They use 1.5\" OD x .120-wall tubular construction with an indexed ball joint cup to correct the ball joint positioning allowing additional down travel and camber adjustment. At the frame mounting ends are durometer-specific rubber bushings for maintenance-free operation while at the other end a quality greaseable ball joints for smooth, quiet operation and superior durability. Arms are finished in a durable black powder coat with a billet aluminum dust cap ready for installation right out of the box.\u003c\/p\u003e\n\u003ch2\u003eThis Kit Configuration\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear Shock Option:\u003c\/strong\u003e NX2 Nitro Series\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOE Knuckle Type:\u003c\/strong\u003e Cast Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBDS Part Number:\u003c\/strong\u003e BDS1545H\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eEasy, 100% Bolt-on installation\u003c\/li\u003e\n\u003cli\u003eMaintains factory like ride quality\u003c\/li\u003e\n\u003cli\u003eStandard NX2 Nitro shocks with vehicle-specific valving for better control\u003c\/li\u003e\n\u003cli\u003eUpgrade to FOX 2.0 Performance Series shocks for maximum performance on and off-road\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTire \u0026amp; Wheel Fitment\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e285 \/ 65 tire on a 18 x 9 wheel with 5.75\" backspacing\u003c\/li\u003e\n\u003cli\u003e305 \/ 55 tire on a 20 x 9 wheel with 5\" backspacing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEstimated install time:\u003c\/strong\u003e 4 hrs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDifficulty:\u003c\/strong\u003e Moderate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecial tools:\u003c\/strong\u003e 35mm Axle Nut Socket, Air Hammer (Recommended), Cut Off Wheel or Equiv., Strut Compressor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eImportant Notes\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eAftermarket wheels must have a minimum of 93.1mm center hub bore.\u003c\/li\u003e\n\u003cli\u003eTires larger than 285\/70r17 or 285\/65r18 cannot be installed on factory wheels due to steering knuckle clearance.\u003c\/li\u003e\n\u003cli\u003eWill NOT work on trucks equipped with cast steel steering knuckles\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"BDS Suspension","offers":[{"title":"Default Title","offer_id":42717573218389,"sku":"BDS1545H","price":1239.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/5868\/8853\/files\/BDS_Ford_1545H_1906H_b9d40712-e8ec-4b5d-a3cc-1108519cfb73.jpg?v=1783716994","url":"https:\/\/padoverland.com\/products\/35-inch-lift-kit-ford-ranger-19-23-4wd-nx2-nitro-series-cast-aluminum","provider":"PAD Overland","version":"1.0","type":"link"}