{"product_id":"35-inch-lift-kit-fox-20-coil-over-ford-ranger-19-23-4wd-cast-steel","title":"3.5 Inch Lift Kit | FOX 2.0 Coil-Over | Ford Ranger (19-23) 4WD - Cast Steel","description":"\u003cp\u003eTake your 2019-2023 Ford Ranger truck to the next level with a 3.5-inch lift kit with FOX 2.0 Coil-Over shocks from BDS. Specially designed for the new Ranger, this 3.5\" leveling kit is engineered for additional tire clearance and improved performance without overextending the suspension or driveline angles at full suspension droop.\u003c\/p\u003e\n\u003cp\u003eTo ensure proper drivetrain geometry the front differential is repositioned using relocation brackets. These brackets correct CV axle angle while allowing the use of the factory front skid plates. Also supplied for the front end are a pair of performance upper control arms (UCAs) designed for improved strength and suspension travel. \u003c\/p\u003e\n\u003cp\u003eUp front, the lift kit includes steel top mount strut spacers, pre-load spacers, differential relocation brackets and tubular upper control arms. In the rear, this kit includes heavy duty lift shackles and custom-tuned matching FOX 2.0 Performance series shocks. \u003c\/p\u003e\n\u003ch2\u003eFOX 2.0 Coil-Over Shocks\u003c\/h2\u003e\n\u003cp\u003eThese FOX 2.0 Performance Series coil-overs bring impressive damper performance for great ride on and offroad capability designed as a direct bolt-in replacement for the factory strut. They feature a 2.0\" extruded and machined 6061 T6 aluminum body for better heat dispersion, along with an internal floating piston (IFP) to eliminate oil aeration, FOX's proprietary internals, 5\/8\" hard chrome plated heat treated alloy shaft and come preloaded with springs and top-plate for easy installation.\u003c\/p\u003e\n\u003ch2\u003eHD Upper Control Arms (UCAs)\u003c\/h2\u003e\n\u003cp\u003eBuilt for strength, performance and increased travel, these upper control arms are ready to bolt-in with most leveled\/lifted trucks. They use 1.5\" OD x .120-wall tubular construction with an indexed ball joint cup to correct the ball joint positioning allowing additional down travel and camber adjustment. At the frame mounting ends are durometer-specific rubber bushings for maintenance-free operation while at the other end a quality greaseable ball joints for smooth, quiet operation and superior durability. Arms are finished in a durable black powder coat with a billet aluminum dust cap ready for installation right out of the box.\u003c\/p\u003e\n\u003ch2\u003eThis Kit Configuration\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOE Knuckle Type:\u003c\/strong\u003e Cast Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBDS Part Number:\u003c\/strong\u003e BDS1906FSL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFOX Performance IFP shocks eliminates oil aeration allowing maximum performance from the factory-tuned, precision valving\u003c\/li\u003e\n\u003cli\u003eHD Upper control arms provide superior strength and proper alignment\u003c\/li\u003e\n\u003cli\u003eAdjustable height to fine tune\u003c\/li\u003e\n\u003cli\u003eProvides level stance from front to rear\u003c\/li\u003e\n\u003cli\u003eEasy, 100% Bolt On installation\u003c\/li\u003e\n\u003cli\u003eFOX shocks are fully serviceable and resistant to corrosion and harsh environments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTire \u0026amp; Wheel Fitment\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e285 \/ 65 tire on a 18 x 9 wheel with 5.75\" backspacing\u003c\/li\u003e\n\u003cli\u003e305 \/ 55 tire on a 20 x 9 wheel with 5\" backspacing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEstimated install time:\u003c\/strong\u003e 4 hrs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDifficulty:\u003c\/strong\u003e Moderate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecial tools:\u003c\/strong\u003e 35mm Axle Nut Socket, Air Hammer (Recommended), Ball Joint Separation Tool, Step Drill Bit, Cut-off Tool\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eImportant Notes\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eAftermarket wheels must have a minimum of 93.1mm center hub bore.\u003c\/li\u003e\n\u003cli\u003eTires larger than 285\/70r17 or 285\/65r18 cannot be installed on factory wheels due to steering knuckle clearance.\u003c\/li\u003e\n\u003cli\u003eBe sure to verify which factory knuckles you have before ordering.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"BDS Suspension","offers":[{"title":"Default Title","offer_id":42717617651797,"sku":"BDS1906FSL","price":2765.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/5868\/8853\/files\/BDS_Ford_1545FSL1906FSL_6064cabd-546c-495f-a71f-6f53f09d5d6b.jpg?v=1783718062","url":"https:\/\/padoverland.com\/products\/35-inch-lift-kit-fox-20-coil-over-ford-ranger-19-23-4wd-cast-steel","provider":"PAD Overland","version":"1.0","type":"link"}