{"product_id":"5-inch-lift-kit-w-radius-arm-ford-f250f350-super-duty-23-26-4wd-diesel-5-inch-block-kit-with-overload-nx2-nitro-series","title":"5 Inch Lift Kit w\/ Radius Arm | Ford F250\/F350 Super Duty (23-26) 4WD | Diesel - 5 Inch Block Kit With Overload \/ NX2 Nitro Series","description":"\u003cp\u003eImprove the ride on your 23-26 Ford Super Duty diesel truck with this 5-inch radius arm lift kit from BDS Suspension. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 37\" tires.\u003c\/p\u003e\n\u003cp\u003eUp front the lift kit includes diesel-specific Pro-Ride coil springs, heavy-duty replacement radius arms, forged drop pitman arm and track bar bracket for steering correction, sway bar relocation, brake line brackets and precision tuned nitrogen charged shocks.\u003c\/p\u003e\n\u003cp\u003eIn the rear this kit utilizes a high-strength fabricated lift block, longer u-bolts, brake line brackets and a matching set of NX2 Nitro or FOX Performance shocks.\u003c\/p\u003e\n\u003ch2\u003eHD Radius Arms\u003c\/h2\u003e\n\u003cp\u003eIn place of the factory stamped steel radius arms BDS supplies a pair of high-strength tubular radius arms. These arms mount into the factory location and offer caster adjustment for a wide range of lift heights along with an OE-style rubber bushing at the frame mount for smooth, quiet, service-free operation.\u003c\/p\u003e\n\u003ch2\u003ePro-Ride Coil Springs\u003c\/h2\u003e\n\u003cp\u003eA pair of full-length, diesel-specific, Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains.\u003c\/p\u003e\n\u003ch2\u003eSteering Correction\u003c\/h2\u003e\n\u003cp\u003eTo optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.\u003c\/p\u003e\n\u003ch2\u003eThis Kit Configuration\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear Lift Option:\u003c\/strong\u003e 5 Inch Block Kit With Overload\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShock Option:\u003c\/strong\u003e NX2 Nitro Series\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBDS Part Number:\u003c\/strong\u003e BDS2203H\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eEasy, 100% Bolt-on installation\u003c\/li\u003e\n\u003cli\u003ePro-Ride dual rate coil springs provide a remarkable ride through any terrain\u003c\/li\u003e\n\u003cli\u003eHeavy duty tubular steel radius arms that correct caster while maximizing ground clearance\u003c\/li\u003e\n\u003cli\u003eTrack bar relocation bracket and pitman arm maintain proper steering angles for improved handling\u003c\/li\u003e\n\u003cli\u003eFabricated steel blocks provide level stance from front to rear\u003c\/li\u003e\n\u003cli\u003eStandard NX2 Nitro shocks with vehicle-specific valving for better control\u003c\/li\u003e\n\u003cli\u003eUpgrade to FOX 2.0 Performance Series shocks for maximum performance on and off-road\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTire \u0026amp; Wheel Fitment\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e37 x 12.5 tire on a 17 x 9 wheel with 5\" backspacing\u003c\/li\u003e\n\u003cli\u003e37 x 12.5 tire on a 18 x 9 wheel with 5\" backspacing\u003c\/li\u003e\n\u003cli\u003e37 x 12.5 tire on a 20 x 9 wheel with 5\" backspacing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEstimated install time:\u003c\/strong\u003e 6-8 hrs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDifficulty:\u003c\/strong\u003e Difficult\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecial tools:\u003c\/strong\u003e Torque Wrench, Die Grinder, Pitman Arm Puller\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eImportant Notes\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eVehicles with radius arm mounted ride height sensors will require BDS123303.\u003c\/li\u003e\n\u003cli\u003eFord recommends the replacement of the pitman arm nut after each time it has been removed.\u003c\/li\u003e\n\u003cli\u003eUse a small pitman arm puller to remove the drag link joint and steering stabilizer taper.\u003c\/li\u003e\n\u003cli\u003eIf your truck is equipped with a 2-piece rear driveshaft, a Carrier Bearing Drop Kit may be required: BDS123402.\u003c\/li\u003e\n\u003cli\u003eDue to the taller factory ride height, Tremor models will not net full advertised lift height. Final ride height will be the same as standard models.\u003c\/li\u003e\n\u003cli\u003eLarger tires on stock wheel are not recommended due to interference with brake line, radius arm and sway bar. Use recommended specs listed in wheel and tire fitment section.\u003c\/li\u003e\n\u003cli\u003eMinor trimming may be necessary for clearance of 37x12.50 tires on certain wheel setups.\u003c\/li\u003e\n\u003cli\u003eInstallation requires a torque wrench capable of 406 ft-lbs.\u003c\/li\u003e\n\u003cli\u003eVehicles with leaf spring ride height sensors must select the rear block option.\u003c\/li\u003e\n\u003cli\u003eFits SRW models only.\u003c\/li\u003e\n\u003cli\u003eRecalibration of your vehicles Advanced Driver Assistance System (ADAS) cameras, radars, light detection and ranging (LiDAR), and other sensors may be necessary by your local dealership or ADAS service center. This will ensure proper functionality of the vehicle features such as lane keeping, lane departure, parking assistance, blind-spot detection, adaptive cruise control systems, and other functions as they did prior to installation. Please connect with your local dealership or ADAS service center. Similar to a wheel alignment, all charges and expenses that may occur from dealership calibrations and adjustments are the sole responsibility of the vehicle owner.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"BDS Suspension","offers":[{"title":"Default Title","offer_id":42717638852693,"sku":"BDS2203H","price":1753.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/5868\/8853\/files\/bds_2203H_2204H_01_98115208-f447-4a16-bfb9-c4ab2470ef15.jpg?v=1783718544","url":"https:\/\/padoverland.com\/products\/5-inch-lift-kit-w-radius-arm-ford-f250f350-super-duty-23-26-4wd-diesel-5-inch-block-kit-with-overload-nx2-nitro-series","provider":"PAD Overland","version":"1.0","type":"link"}