{"product_id":"6-inch-lift-kit-w-4-link-ford-f250f350-super-duty-08-10-4wd-gas-block-kit-without-factory-overload-nx2-nitro-series","title":"6 Inch Lift Kit w\/ 4-Link | Ford F250\/F350 Super Duty (08-10) 4WD | Gas - Block Kit Without Factory Overload \/ NX2 Nitro Series","description":"\u003cp\u003eTake your 2008-2010 Ford Super Duty F250 and F350 gas truck to the next level with this 6-inch lift kit plus 4-link conversion from BDS. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 37\" tires.\u003c\/p\u003e\n\u003cp\u003eUp front the lift kit includes gas-specific Pro-Ride coil springs, heavy-duty 4-link control arms, forged drop pitman arm and track bar bracket for steering correction, sway bar relocation, brake line brackets, and custom-tuned nitrogen charged shocks.\u003c\/p\u003e\n\u003cp\u003eIn the rear the base kit utilizes a high strength lift blocks, longer u-bolts, brake line brackets and a matching set of NX2 Nitro or FOX Performance shocks.\u003c\/p\u003e\n\u003ch2\u003ePro-Ride Coil Springs\u003c\/h2\u003e\n\u003cp\u003eA pair of full-length, gas-specific, Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains.\u003c\/p\u003e\n\u003ch2\u003e4-Link Conversion\u003c\/h2\u003e\n\u003cp\u003eConvert the factory stamped steel radius arms over to the BDS 4-link to optimize suspension geometry for better handling characteristics while adding strength and stability. This bolt-on upgrade utilizes high-strength ¼-inch steel brackets that allow mounting of HD upper and lower control arms to correct axle positioning while limiting caster change throughout wheel travel.\u003c\/p\u003e\n\u003ch2\u003eThis Kit Configuration\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear Lift Option:\u003c\/strong\u003e Block Kit Without Factory Overload\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShock Option:\u003c\/strong\u003e NX2 Nitro Series\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBDS Part Number:\u003c\/strong\u003e BDS564H\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eEasy, 100% Bolt-on installation\u003c\/li\u003e\n\u003cli\u003ePro-Ride dual rate coil springs provide a remarkable ride through any terrain\u003c\/li\u003e\n\u003cli\u003eHeavy duty 4-Link control arms offer improved handling, stability, strength and caster control during wheel travel\u003c\/li\u003e\n\u003cli\u003eTrack bar relocation bracket and pitman arm maintain proper steering angles for improved handling\u003c\/li\u003e\n\u003cli\u003eFabricated steel blocks provide level stance from front to rear\u003c\/li\u003e\n\u003cli\u003eStandard NX2 Nitro shocks with vehicle-specific valving for better control\u003c\/li\u003e\n\u003cli\u003eUpgrade to FOX 2.0 Performance Series shocks for maximum performance on and off-road\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTire \u0026amp; Wheel Fitment\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e37 x 12.5 tire on a 17 x 9 wheel with 4.5\" backspacing\u003c\/li\u003e\n\u003cli\u003e37 x 12.5 tire on a 18 x 9 wheel with 4.5\" backspacing\u003c\/li\u003e\n\u003cli\u003e37 x 12.5 tire on a 20 x 9 wheel with 4.5\" backspacing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEstimated install time:\u003c\/strong\u003e 8 hrs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDifficulty:\u003c\/strong\u003e Moderate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecial tools:\u003c\/strong\u003e Drill \/ Bit Set, Pitman Arm Puller\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eImportant Notes\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eRemoval of the factory block is required.\u003c\/li\u003e\n\u003cli\u003eInstallation of the rear block kit will result in a \"pre-runner\" look with the rear of the vehicle 2\" lower than the front. To get a level stance you must upgrade to the rear leaf spring option.\u003c\/li\u003e\n\u003cli\u003eThese trucks were manufactured with and without top mounted overload springs on the rear leaf springs. A top mounted overload is an extra leaf separate from the pack that set above the main leaf. You will need to identify which you have before ordering.\u003c\/li\u003e\n\u003cli\u003eIf your vehicle is equipped with a carrier bearing, you will need to order 123402 in the options section.\u003c\/li\u003e\n\u003cli\u003eAlthough extremely rare, front driveline vibration may occur.\u003c\/li\u003e\n\u003cli\u003eFront exhaust modification may be required to clear the front driveshaft on gas models.\u003c\/li\u003e\n\u003cli\u003eU-bolts will not fit dually models.\u003c\/li\u003e\n\u003cli\u003eDropped pitman arm will not fit 10 lug wide track F350 models.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"BDS Suspension","offers":[{"title":"Default Title","offer_id":42717665755221,"sku":"BDS564H","price":2432.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/5868\/8853\/files\/BDS_Ford_560H_3ffee62a-d6bd-41c8-ab6c-9ce40b516815.jpg?v=1783719008","url":"https:\/\/padoverland.com\/products\/6-inch-lift-kit-w-4-link-ford-f250f350-super-duty-08-10-4wd-gas-block-kit-without-factory-overload-nx2-nitro-series","provider":"PAD Overland","version":"1.0","type":"link"}